I have an Intel HD Graphics 4400 in my Asus VivoMini UN62 (Win7Pro-8GigMem) with driver rev

10.18.14.4156 installed. Monitors are dual LG L246WP HDMI with native res 1920x1200.

When I use the Intel HD Graphics Control Panel to select 1920x1220 for the display, the

desktop is pushed off the left of the monitor making it impossible to see/use the Windows

START button.

If I dial the resolution back to 1024x768 and set "Maintain Display Scaling",

I can get the entire desktop to show and align with the edges of the monitor display area

.. but that throws away two thirds of the desktop work area.

I have tried the LG monitor settings, but there are no adjustments there that I can find

that help.

QUESTION:  Am I missing something here or do I have a hardware failure? (I have image

captures of this if that will help.)

I am at a dead end here after two days of digging/experimenting and would really appreciate

any help to get an understanding and resolution to the problem.

Thanks!
Bruce

blcavender@gmail.com

Hello,

Ever since ArmA 3 was released as an alpha back in March, it plagued me (and quite a few others) with these apparently random DirectX 11 crashes (either freezing or CTD):

"D3D Error - DXGI_ERROR_DEVICE_REMOVED"

"Display Driver Stopped Responding and has recovered."

A few days ago I, acting on a hunch, installed an old driver (15.28.7.64.2867) from October(?) 2012 and was able to play the game without any crashes in area's/maps that were unplayable before.

Working my way up (I have some, but not all drivers released) I found that the drivers up to 9.17.10.2932 (December 2012) perform flawlessly, while 9.18.10.3071 (March 2013) and later tend to suffer from this issue.

So while installing the latest drivers is recommended as a starting point for every glitch, in this case it is not going to get you anywhere: it seems that every iteration has inherited a flaw that was introduced somewhere during that period (December 2012 - March 2013).

I hope this in some way helps you to tackle this issue, and allows me to have my graphics driver up to date in the near future...

These 'tests' were performed, ceteris paribus, on this machine:

Intel i7-3770K@3500|3900 (HD 4000@1150)

MSi Z77A-GD65 (UEFI: 10.11ß)

32GB Corsair Vengeance@1600

Windows 8.1_x64

All drivers were up to date.

Hello,
Is there is a short cut / keyboard command to change the Brightness for the Intel 855 Embedded Graphics Controller?

So... I have discovered that teh (WDDM 1.1) drivers DO NOT work with minecraft. I recently had my PC reset to factory settings, because it was being slower than usual. The wipe fixed my slowness problem, but my minecraft no longer worked. Before I had my PC wiped, I had somehow found non-wddm drivers and installed them. I have no idea how I did it, and i've tried to do it again. I can't. I have the g45/g43 Express Chipset. Also, Why hasent Intel put up windows 8 drivers on their website? I see windows 7, Vista, and XP but no windows 8. It seems the only windows 8 drivers they have are installed on your computer automatically, and cant be found online. I hope someone can find a solution soon, or I will just get a computer with nvidia graphics. Thanks!

Здравствуйте, возникла проблема такого рода, имеется планшет Surface pro3 i7 8gb.ram 512gb.sdd hdd. intel hd graphics 5000(со свеми последними обнослениями и последним апдетом драйверов) и  microsoft wireless display adapter (с последней прошивкой), весь описанный процесс будет происходить в режиме дублирования экрана, проблема состоит в том, что при разрешении 1920х1080 через приблизительно через час работы вывода изображения на экран(телевизора или монитора, было опробовано более 5 разных устройств) начинаются залагивания мышки на втором экране(телевизоре или мониторе) и время отклика второго экрана увеличивается на 2-3 секунды(по сравнению с основным), на основном экране при этом всё в порядке, проблема решается отключением и подключением второго экрана заного, а при разрешении экрана 1366х768 всё работает стабильно,  это всё происходит при обычной работе планшета(почта, word, excel, lync).  при просмотре и во время просмотра например фильма никаких залагиваний замечено не было. Помогите разобраться с этой проблемой, заранее спасибо.

I have a tablet with CPU: Atom z3735D. Its builtin gpu causes bsod when open webcam software, then open webcam properties. The webcam is built-in.

Dump attached.

windbg:

---------------------------------------------------------------------------------------------------------------------------------------
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       srv*

************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       srv*

Microsoft (R) Windows Debugger Version 6.3.9600.17298 X86
Copyright (c) Microsoft Corporation. All rights reserved.

Loading Dump File [C:\Windows\Minidump\032915-13218-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available

************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       srv*

************* Symbol Path validation summary **************
Response                         Time (ms)     Location
Deferred                                       srv*
Symbol search path is: srv*
Executable search path is: srv*
Windows 8 Kernel Version 9600 MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 9600.17328.x86fre.winblue_r3.140827-1500
Machine Name:
Kernel base = 0x8161c000 PsLoadedModuleList = 0x8181a498
Debug session time: Sun Mar 29 15:38:48.858 2015 (UTC + 3:00)
System Uptime: 0 days 0:06:40.330
Loading Kernel Symbols
.

Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.

..............................................................
................................................................
...........................................
Loading User Symbols
Loading unloaded module list
......
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 9F, {3, 93cf6c40, 82acfb44, 9493dde0}

*** WARNING: Unable to verify timestamp for igdkmd32.sys
*** ERROR: Module load completed but symbols could not be loaded for igdkmd32.sys
Probably caused by : igdkmd32.sys

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time.
Arguments:
Arg1: 00000003, A device object has been blocking an Irp for too long a time
Arg2: 93cf6c40, Physical Device Object of the stack
Arg3: 82acfb44, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: 9493dde0, The blocked IRP

Debugging Details:
------------------

DRVPOWERSTATE_SUBCODE:  3

IMAGE_NAME:  igdkmd32.sys

DEBUG_FLR_IMAGE_TIMESTAMP:  548e641f

MODULE_NAME: igdkmd32

FAULTING_MODULE: 8d410000 igdkmd32

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT

BUGCHECK_STR:  0x9F

PROCESS_NAME:  System

CURRENT_IRQL:  2

ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) x86fre

DPC_STACK_BASE:  FFFFFFFF82AD4000

STACK_TEXT: 
82acfb1c 817b82f5 0000009f 00000003 93cf6c40 nt!KeBugCheckEx
82acfb54 817b8241 00000000 81812810 00000a02 nt!PopIrpWatchdogBugcheck+0xae
82acfb68 8169ee56 8c7e3510 8c7e34c8 4dfa3ca5 nt!PopIrpWatchdog+0x28
82acfc20 8169ea66 82acfc68 00000000 88b14bc0 nt!KiExecuteAllDpcs+0x216
82acfd44 81730290 00000000 00000000 00000000 nt!KiRetireDpcList+0xf6
82acfd48 00000000 00000000 00000000 00000000 nt!KiIdleLoop+0x38

STACK_COMMAND:  kb

FOLLOWUP_NAME:  MachineOwner

FAILURE_BUCKET_ID:  0x9F_3_camera_IMAGE_igdkmd32.sys

BUCKET_ID:  0x9F_3_camera_IMAGE_igdkmd32.sys

ANALYSIS_SOURCE:  KM

FAILURE_ID_HASH_STRING:  km:0x9f_3_camera_image_igdkmd32.sys

FAILURE_ID_HASH:  {d113fca4-7c99-b6fd-69d4-fcff2905392c}

Followup: MachineOwner
---------

0: kd> lmvm igdkmd32
start    end        module name
8d410000 8d704000   igdkmd32 T (no symbols)          
    Loaded symbol image file: igdkmd32.sys
    Image path: \SystemRoot\system32\DRIVERS\igdkmd32.sys
    Image name: igdkmd32.sys
    Timestamp:        Mon Dec 15 07:31:27 2014 (548E641F)
    CheckSum:         002E6921
    ImageSize:        002F4000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
0: kd> !irp 9493dde0
Irp is active with 6 stacks 5 is current (= 0x9493dee0)
No Mdl: No System Buffer: Thread 00000000:  Irp stack trace.  Pending has been returned
     cmd  flg cl Device   File     Completion-Context
[  0, 0]   0  0 00000000 00000000 00000000-00000000   

   Args: 00000000 00000000 00000000 00000000
[  0, 0]   0  0 00000000 00000000 00000000-00000000   

   Args: 00000000 00000000 00000000 00000000
[  0, 0]   0  0 00000000 00000000 00000000-00000000   

   Args: 00000000 00000000 00000000 00000000
[ 16, 0]   0  0 93cf6c40 00000000 8be37399-8c7f14d0   
        \Driver\igfx ks!CKsDevice::CompleteDevicePowerIrp
   Args: 00000000 00000000 00000000 00000000
>[ 16, 2]   0 e1 949afdc0 00000000 81707368-8c7e34c8 Success Error Cancel pending
       Unable to load image \SystemRoot\system32\DRIVERS\camera.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for camera.sys
*** ERROR: Module load completed but symbols could not be loaded for camera.sys
\Driver\camera nt!PopRequestCompletion
   Args: 00000000 00000001 00000001 00000000
[  0, 0]   0  0 00000000 00000000 00000000-8c7e34c8   

   Args: 00000000 00000000 00000000 00000000

when gaming at 1920x1080 1080p fullscreen whenever there is heavy action going on in game cpu gpu usage goes up, my screen would blink once or twice as if turning on/off v-sync but the blink lasts a little longer maybe half a second compared to actually turning on/off v-sync,I tried every connector on my asrock z97 extreme4 hdmi/displayport/dvi/vga.

I was using an older monitor via dvi 1280x1024 native res and no issues, I have tried most of the drivers from intel 3670, 4080, 4156.

I always reformat and install win 7 x64 fresh when trying out new drivers. 

I experience tearing with my intel hd graphics p4600 when playing league of legends. What can I do?

I installed the latest Intel driver, i tried every different setting in driver and in game's settings. The video quality is very very good apart from little tearing.What a shame. I wonder if this has anything to do with the "p" in xeon's p4600 graphics.

I have the asus maximus vii hero motherboard.

I was told it could be the graphics driver needs to be updated

is this true? the Cor I family of processors cannot handle more memory without first updating the graphics driver of the CPU?

or is the ICore limited to just working with a sloooow 1333 MHz @ 4 gigs of ram???

Crucial told me it could be a graphics issue

Hi,

I have Intel NUC D54250WYKH for 4 mounts and since i got it, it is not accepting graphic driver update. I am keep getting message "This computer does not meet the minimum requirements for installing the software", and "dedicated video memory" is only 1 MB. I am running windows 8.1 64 bit.

What can I do to fix this problem?

Thanks in advance

I have been experiencing a problem with multiple clients where the HD Video driver has been reverting to an older driver that is not compatible software on their workstation.  I was able to get a screen shot where Windows update is attempting to update the older driver over a newer one. If I select the update, it will replace the current driver even though it is newer.  Is there a process to get this corrected, so that Windows update does not perform an incorrect driver update?

Thanks....

SG

I

I need help with my last monitor I bought, It's a Dell e197fpf i am using just a standard Vga cord from my laptop to the monitor.

first i have a samsung hd lcd tv connected by hdmi, and built in display, (The Samsung tv Primary, Built in 2nd).

I looked up my cpu (Intel(R) Core(R) i5 3317u 1.7Ghz, and it supports 3 monitors  (ARK | Intel® Core™ i5-3317U Processor (3M Cache, up to 2.60 GHz )  when i connect the monitor from vga it turns on just fine and is also an option to use on the Intel Graphics Control panel

But when i try to save it says unable to save, if you can help that would be great, Need anymore information just ask

Thanks

SO I have a Gigabyte H97M-D3H and a Gigabyte 660 (Windforce)

I was just wanting to know how I can enable my On Board GPU so I can run another Monitor. I'd also use it to render videos or watch HD movies on. So any help?

Thanks, Lewis.

I have bought a new Desktop

It has windows 8.1 and it is 64- bit machine

I want to replace the OS to become windows XP 32 bit

It has the following processor

It has a processor :

Pentium G2030T

and a video card

Intel Graphics Media Accelerator HD Integrated graphics

• Intel Graphics Media Accelerator HD (DX11)

Can I use any intel graphics driver that works with Windows XP 32 if I want to switch OS

Hello Graphics Communities!

For a very long time now we've been trying to track down, diagnose, and correct an issue that seems to be happening all across the board with Intel® Graphics.  Users, for various reasons - seem to have issues with OEM systems (and Intel® NUC's) losing their display for different events.

• Installing new drivers
• Rebooting
• Computers idling, going into sleep or hibernation
• Other random events

We have run into a stumbling block in fixing this issue, and that is that we are unable to reproduce the symptoms above.  We have ordered exact-matching systems, displays and cables - and matched our configurations to those of the users having problems, and we are completely unable to reproduce the problem.  The issue is complex, but in this particular case - it stems from the fact that two users with the same configuration are not guaranteed to have the problem, it varies from user to user, system to system, display to display.

What we at Intel® are asking now though is 2-fold.  If you are one of these users (or a business) experiencing a consistent black-screening issue as mentioned above, we would like to procure your COMPLETE system configuration.  This means, we want you to ship us (at our expense) - the System (desktop or laptop), display (TV, monitor) AND the cable (hdmi, dp, dvi, vga) used by your system when it starts to have a blackscreen failure.  If you are willing to do this, you should be aware that we will keep your system for an extended period, and will compensate you by replacing your setup.

NOW!  Even if you are not willing to send us your system, and would just like to inform us that you have a black-screen issue.  That is okay too. Even if you have already submitted this info in some of our other black-screen threads, feel free to submit it here too.  Please submit the following information into this thread so that we can continue to document all possible instances of it.  Just copy and paste the below list and put in relevant information (completely!).  *NOTE* If you have not already done so, please update your BIOS and Display Driver to the latest version available.  We cannot accept a report of a failing configuration that is not up to date.  Additionally, if you are running your display through a 3rd party device such as a projector or an AV/R (receiver), you need to show that the problem still occurs without the extra device connected (a direct connection from system to display is required).

Any/all information is valuable.

Thank you for your information & cooperation!

-Nic

This update addresses several previously found issues. Please see the Release Notes and excerpt below for details. As always, feedback is appreciated.

The 15.36.18.4156 has been posted to Intel Download Center at the following direct links to the drivers:

64 - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=24785

32 - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=24786

This driver supports the following:

Support for Intel 5th Generation Intel® Core processors with HD Graphics 5500, HD Graphics 6000, and Iris™ Graphics 6100 and key enhancements for Intel 4th Generation Intel Core Processors.  This driver provides up to 10% better performance improvement when running 3DMark11* benchmark and fixes many game, application, display and UI issues. 

  • 5th Generation Intel® Core Processors with Intel HD graphics, Intel Iris™ graphics and select Pentium®/ Celeron® Processors with Intel® HD graphics for Microsoft Windows* 8.1, Microsoft Windows* 8 and Microsoft Windows* 7 operating systems.

• Intel® Core™ M with Intel HD graphics 5300 for Microsoft Windows* 8.1, Microsoft Windows* 8 and Microsoft Windows* 7 operating systems.

• 4th Generation Intel® Core™ Processors with Intel HD graphics, Intel Iris™ graphics and Intel Iris Pro graphics and select Pentium®/ Celeron® Processors with Intel® HD graphics for Microsoft Windows* 8.1, Microsoft Windows* 8 and Microsoft Windows* 7 operating systems.

New features with this release:

Up to 10% performance improvement as measured on 3D Mark 11* benchmark. 

Key issues resolve with this release:

Hello,

it would be nice if the Intel Graphics driver would support overriding EDID information like described in this document from Microsoft:

http://msdn.microsoft.com/en-us/windows/hardware/gg487330

Why is this needed?

In a common HTPC (multimedia PC) setup with a PC, AVR (audio video receiver) and a television, the EDID information stored in the receiver & television that is passed to the PC determines the video and audio capabilities like: supported resolutions, supported audio formats etc ..

The problem is that very often the system only "sees" the EDID information of the television, and not that of the receiver, and so you don't get support for audio formats like DTS, DTS-HD, Dolby TrueHD that are supported by the receiver ...

The latest Sandy bridge CPU and corresponding chipset support all these sound standards, but they often not useable cause of these EDID problems.

Actually it really does not matter what video card / integrated graphics you use, NVidia and AMD graphics have the same problem, but their drivers

allows people to override the EDID information like is described in the above linked document from Microsoft.

Please implement this stuff, shouldn't be that hard to do, for one of you senior driver programmers it's probably just a few hours of work ...

Thank you

Christian

Hello,

I have a problem with intel hd 4000. I have Samsung NP450R5G laptop and i have intel hd 4000 graphics card. I have 2 monitor also my laptop have an included monitor i want to use all of my monitor at the same time but when i connect one of them hdmi and other to vga only give screen which connected from hdmi but i have to use my vga monitor too at the same time.

On windows or intel hd graphics control center see both monitors like;

Also i can see in windows settings;

But when i try to clone my monitor which connected via vga Windows settings gives "unable to save display settings" error.

Actually i don't want to buy any usb to vga or hdmi converter also i don't want to buy any usb graphics card. I already have two output on my notebook and i want to use simultaneously.

You can found dxdiag on attachment can you help me about this ? How can i use my all monitors at the same time ?

This update addresses several previously found issues. Please see the Release Notes excerpt below for details. As always, feedback is appreciated.

The 15.33.35.4176 has been posted to Intel Download Center at the following direct links to the drivers:

32 bit - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=24825

64 bit - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=24826

Key issues resolve with this release:

Note: It is recommended to upgrade the below list of applications to avoid any unexpected issues.

• 3DMark11*: Upgrade to 1.0.3 or later
• Batman Arkham City*: Upgrade to the latest patch
• Mafia 2*: Upgrade to the latest patch
• Company of Heroes*: Upgrade to 2.101 and update Opposing Fronts to 2.500 or Tales of Valor to 2.601
• HomeFront*: Upgrade to 1.0.5 or later
• Unigine Heaven*: Upgrade to 2.5 or later
• Battlefield 3*: Upgrade to latest patch

When i change settings in gfxui the settings says to be changed but when i reopen gfxui to check that they've been changed they have the same settings as before i changed them.